Dremel is a pretty big name in the home improvement tool industry and it owns a place when it comes to naming a few top ones. As these products are battery powered, they ensure mobility and have to be charged. But despite having a good name, oftentimes you may face some issues with its charger.
One of the most commonly witnessed problems with its charger is that the green light on it, which acts as an indicator, stops working. The reasons behind this are more than one, such as – the charger getting damaged, battery issues or wiring problems, etc.
In this article, we will be talking about some of the most common reasons for the Dremel charger not working problem and their possible solutions. So, without further ado, let’s get to the discussion.
Table of Contents
Why The Dremel Charger Green Light Doesn’t Work?
We have already stated that the green light on the Dremel charger works as an indicator. It tells you the current charging state of the particular Dremel tool that you are using. Now the question is, why do you face issues with this thing? Actually, there are quite a few reasons behind the green light of the Dremel charger not working. Such as –
- Battery problem
- Charger problem
- Wiring problem
- Motherboard problem
The above-stated reasons are the most common yet basic issues behind this problem. Some of these are curable while for others, you don’t have any other option rather than going with a replacement. Let’s go a bit deeper, talk about these problems in a bit more detailed manner and know the solution.
Read to know: Dremel Micro 8050 Won’t Turn On
A Brief Discussion: The Solution
So, now that we have come to know about the basic problems of the Dremel green light charger not working, let’s get to know what can be done to get rid of them.
Battery Issues
So, the very obvious reason behind the green light issue is the battery getting dead. It’s pretty normal that a battery won’t be able to serve after a certain period of time. It will eventually worn out or won’t stay in working condition.
In a case like this, when you will plug in the charger, the green light won’t turn on indicating that maybe the battery is dead. There are some symptoms that indicate battery issues, for example, the green light won’t turn on, the light will turn on but will go out immediately or after 15-20 seconds, etc.
Replace the old battery with a new one and it will start working again.
However, there is another reason behind the battery getting dead and that is if you keep your Dremel charging for a very long period of time (forever) then the battery will overcharge and eventually lose its working capacity.
That’s why don’t keep them charging all the time. Unplugged your Dremel tool immediately when it’s fully charged.
Read also: Why Dremel Lite 7760 Not Charging
Charger Problem
Another obvious reason behind the green light not lighting up is a malfunction in the charger. If the charger is faulty, the green light on it won’t turn on.
And replacing the charger is the only option available here. You can easily get a new charger via both online and offline platforms.
Wiring Problem
Sometimes the wiring inside the charger gets loose. This even happens with the ones that connect the battery and other key components. Eventually, this causes the charger not to function properly and the green light on it stays off.
To get rid of this, open up the charger with a screwdriver. You will get to see a bunch of wires. Just push them back or twist them a bit. This will establish the connection again and the green light will start to light up.
Most important: Dremel Keeps Shutting Off
Motherboard Problem
The green light not turning on is also an indicator that maybe the motherboard isn’t working anymore. However, to be sure, open the tool with a screwdriver.
Later on, bring out the RAM, drives, and wireless card. When you are done doing that, get an AC adapter and connect it to the motherboard.
If you see any changes, the motherboard is working. But if there isn’t any change, the motherboard is not working anymore and you will have to change it.
Things To Keep in Mind
We have discussed some of the reasons why the green light won’t turn on. But sometimes things can get a bit deceiving for you.
There are some times when you may think that the green light on your Dremel isn’t working but in reality, it is working.
Read: Hyper Tough Rotary Tool Troubleshooting
The Green Light Is Blinking
The green light continues to blink when the Dremel tool is getting charged up. So, don’t think that the blinking is indicating any error or things like that. It’s just the usual quality of the Dremel charger.
The Green Light Is Off
When the tool is fully charged, the green light on the charger turns off. You may think of it as a bug but it isn’t.
When you see the green light off after putting the device on charge, unplug it and see if it’s fully charged or not. In most cases, it will be in 100% battery condition.
Wrap Up
The Dremel charger green light not working is a pretty usual thing. Yes, almost all the solutions to get rid of it is a replacement but at least the best part is that the problem isn’t that complex to deal with.
Just be a little bit patient and examine properly before making any replacement or fixing move. As we have already said that these are situations where the whole thing is alright but it may seem that there is something wrong going on. Also, don’t forget to go with the measures that we shared.
So! That was our take on the Dremel charger green light not working problem. It was a research-based move from our side and we had to put in a lot of effort. We wish that you will be benefitted from this and only then our hard work will pay off. All the very best!
Leave a Reply