Recently, Dremel has established a solid reputation as an admirable consumer tool, growing its production line by giving us the necessary accessories. It illustrates how far technology has come and how cordless accessories powered by batteries have replaced the need for us to be tethered to wires.
Speaking of tools with a wide range of versatility, the new rotary tool we’ll discuss today is the Dremel 8050. This tool won’t let you down if you’re working with wood and need accuracy, precision, and high performance. This one will provide you with the most flexible options, so feel free to cut, shape, or do whatever you like.
However, what we are more concerned about is that there have been some problems with the tool that affect how it performs. Some users reported having trouble turning it on or charging it. Let’s look at what the problem could be and how to fix it.
Table of Contents
Dremel Micro 8050 Won’t Turn On
Looking at the Dremel Micro, you’ll surely have no doubt about the precision of its work. You can hold it like a pencil and act like you are drawing out your magic on the woodwork. It can show its wonders for engraving on wood, writing or designing patterns, or whatever you like.
There is no longer any tool blessed with seven blessings and free of flaws or interruptions in its performance when acting. The Dremel Micro 8050 tool is the same. It has been reported that it can occasionally cause minor problems while operating, such as refusing to turn on or charging issues, etc. It won’t always be the tool’s fault entirely. There may also be additional issues.
What Could Be the Possible Reasons?
The possible explanations for the difficulty turning on the Dremel 8050 are what we’re going to investigate. Here are a few possible reasons why this is happening.
The Power Button is Damaged
The first usual idea is that the power switch or button is directly to blame. This part is prone to damage from use over time. Any tool can become broken or damaged after being used for a while. It’s possible that you are unaware of where it fell or accidentally broke. Even if it’s brand new, it might break because of poor-quality manufacturing or packaging.
If that is the problem, it needs to be fixed or replaced. For a deeper understanding of the problem, it is best to refer to a power switch backup manual.
How to fix it?
Here’s how can repair/replace a faulty power switch-
- Spot the battery first, then carefully remove it. The ring around the speed selector can be easily removed, so try to do it without breaking it.
- By pressing the gear icon, remove the collar wrench.
- The shells are joined by a metal lock, which you can gently pry off to separate the shells. A screwdriver can be used to assist with this. Don’t forget the screws either; if you leave them in place, the piece will only crumble apart.
- Now that the broken power switch has been removed, you can easily figure out what’s wrong and possibly replace it as well.
Read: Dremel Lite 7760 Not Charging
The Battery Can be the Main Suspect
Although it may seem silly, the battery isn’t always the innocent one, especially if you’ve been using the Dremel for a while.
Battery Not Charged
The Dremel 8050 can work continuously for up to 6 hours after being fully charged, which typically takes about 4 hours. Before using it once more, check to see if the battery is fully charged or give it a quick charge.
Some batteries have a limited lifespan and may become worn down if left inactive for an extended period of time. Either you haven’t used the tool in a while, causing it to drain and end up dead, or the battery was defective when it was shipped, which is the least likely scenario.
Read also: Dremel Battery Charger Green Light Not Working
Battery Malfunction
It’s also possible that the battery isn’t properly installed or is too loose to provide the necessary power. To do that, you must determine whether the battery is loose or whether the connection point is flawed. If the battery is functioning properly, then another reason might exist.
How to fix it?
The first thing to do will be to replace the battery or determine whether it can be replaced. It is best to seek professional assistance if there is a problem with the tool’s contact point with the battery rather than further damaging it by nudging it.
Read Also: Carve Wood for Beginners
The Motor Can Be Burned Out
A burned-out motor is a final possibility to rule out if the battery is fine and the power switch is unharmed. If this is the problem, your only options are to change the motor or buy a new tool if this is the problem. The burning may not always be noticeable, but it still has the potential to get fried after excessive use without your knowledge.
How to fix it?
- Spot the battery first, then carefully remove it. The ring around the speed selector can be easily removed, so try to do it without breaking it.
- By pressing the gear icon, remove the collar wrench.
- The shells are joined by a metal lock, which you can gently pry off to separate the shells. To do this, a screwdriver can be used as assistance. Don’t forget the screws either; if you leave them in place, the piece will only crumble apart.
Up until this point, it’s similar to changing the power switch.
- Next, attempt to gently remove the broken motor. Now, to check if the motor is burned out, pinpoint the wires. To remove the internal wires and separate the connection point, use tweezers.
- In this way, after removing the defective motor, you can install a new one by performing the same procedures backward.
Read to know: Dremel Keeps Shutting Off
Overheated Tool
The Dremel can get very hot, especially when used continuously without pausing at speeds between 5000 and 25000 RPM. It can occasionally become burned out even if you reduce the speed and only use it briefly. Most of the time, internal parts, especially the motor, burn due to overheating.
The majority of the time, this problem arises when cutting through, engraving, or working continuously on the hardwood. The motor is put under additional strain as a result of this, and as a result, it frequently overheats, malfunctions internally, and loses power as a result.
If you are convinced that this is the problem, you can replace the damaged component, such as the motor, and ensure that routine maintenance is performed in the future when it comes to excessive heating.
Plus, the Dremel 8050 could quickly overheat and stop functioning if it is overloaded and the paths for heat to escape are blocked. Dremel overheats as a result of clogged exhaust and continuous use. It’s possible that the tool has smoked from overheating and you can’t turn it on because of that. This could be caused by blocked air ducts, so it’s best to keep the vent clean.
What Can You Do?
The solution will only work after you determine the most likely cause of your Dremel Micro 8050 not turning on. Once you realize that there are two ways to solve the problem.
Attempt to Fix it
Here’s what you can do if your Dremel has stopped functioning and is not turning on between operations.
First, unplug the tool. Now,
- Look to see if it’s heating up.
- Check if the power button bears any damage.
- Make sure the shaft can spin flexibly.
- Examine the battery for any issues.
- Check for damage, both internal and external.
- Check for any burning or smoke odors.
After identifying the malfunction, follow our advice above and consult the manual as needed.
Take One New
Sometimes, you can’t fix it on your own, and occasionally a new tool with faulty aspects won’t work to your satisfaction either. In these cases, finding an alternative solution—or finding a new way to complete the task—is preferable.
The Conclusion
As tested, the Dremel Micro 8050 is already a fairly high-quality item, but as we previously stated, not every component can be fault-free forever. Consequently, if you enjoy Dremel products and would like to continue woodworking with them, you may encounter similar issues.
Therefore, the next time the tool doesn’t answer your call, you may very well understand the problems that are causing it. Good luck if you try to fix it yourself!
Resources:
https://portablepowerguides.com/dremel-battery-not-charging/
Leave a Reply